Examples - Modules

Modules and Sensors

This section contains modules that can b e easily plugged into your application. That means, just get one of these sensors, follow the cables and copy/paste our code. All modules are tested with Wiring, but should also work on Arduino-boards. Life can be so easy!

Modules


Attach:{=$FullName}/{=$:Image}?

{=$:Date}: {=$:Title}?
{=$:Teaser} ...>>?


2010-05-25: Photointerrupter
Using a Photointerrupter as a lightbarrier or as an Encoder ...>>


2009-05-29: Acceleration Sensor LIS3LV Version 1.0.1
This Module can be used to plug an Acceleration Sensor LIS3LV into your project. Connect your sensors to any digital pin on your board. ...>>


2009-01-22: Supersonic SRF05
This Module can be used to plug several Supersonic SRF05 sensors into your project. Connect your sensors to any digital pin on your board. ...>>


2009-01-20: PIR Motion Sensor SE-90
This Example shows the use of a PIR Motion Sensor SE-90. ...>>


2009-01-20: Ambient Light
This Example shows the use of an ambient light sensor. Connect the sensor to an analog pin. ...>>


2009-01-20: PIR Motion Sensor SE-90
This Module can be used to plug several Motion-Sensors into your project. Connect your sensors to any digital pin on your board. ...>>


2008-10-28: Potis
This Example shows the use of Potis. ...>>


2008-10-28: Compass
This Example shows the use of a Compass. ...>>


2008-10-28: Infrared
This Example shows the use of Infrared. ...>>


2008-10-28: Piezo
This Example shows the use of a Piezo Sensor. ...>>


2008-10-28: Supersonic Simple
This Example shows the use of ultrasonic. ...>>


2008-10-28: Buttons
This Example shows the use of Buttons. ...>>


2008-10-28: Supersonic LCD
This Example shows the use of ultrasonic. ...>>


20-01-2009: Real Time Clock Module
This Module can be used to plug a Real Time Clock into your project. Connect the clock to your I2C-Pins (SCL, SDA) ...>>


18-05-2009: uDrive Micro SD Reader/Writer using Fat16
This Module can be used to plug a uDrive Micro SD card reader and writer directly into your project. All data will be stored using Fat16 and can be read directly from your pc or mac! ...>>


15-01-2009: Nokia LCD SGD-A
This Module shows the use of a Nokia LCD SGD-A. The Nokia LCD display has several additinal futures, build in speaker, RAM and EEPROM. ...>>


14-09-2012: Tri-Axis Gyro Breakout - L3G4200D
This is a breakout board for the L3G4200D three-axis angular rate sensor. The L3G4200D has a full scale of 250/500/2000 dps. ...>>


14-09-2012: Barometric Pressure Sensor - BMP085
This is a breakout board for the Bosch BMP085 barometric pressure sensor. The BMP085 offers a measuring range of 300 to 1100 hPa with an accuracy down to 0.03 hPa in ultra-high resolution mode. ...>>


14-09-2012: Single Axis Accelerometer Breakout Board - ADXL193
The ADXL193 is a high-g sensor with a full scale range of 250g. ...>>


02-02-2009: Acceleration Sensor LIS302DL
This Module can be used to plug an Acceleration Sensor LIS302DL into your project. Connect your sensors to I2C-Pins on your Board (Pin 0 and 1 on Wiring-Board). ...>>


02-02-2009: Pressure Sensor SCP1000
This Module can be used to plug a Pressure Sensor SCP1000 into your project. Connect your sensors to any digital pin on your board. ...>>